How to Take Vehicle Photos for Seat Cover Fit Verification

To help us confirm the correct seat cover pattern for your vehicle, please provide clear photos of your original vehicle seats. Good photos allow our team to check the seat shape, headrests, cushion edges, leg rest, rear seat structure, and other important details before production.

If the photos are blocked, blurry, too dark, or do not show the full seat structure, we may need to ask you for new photos. This may delay order confirmation or production.

General Photo Requirements

• Please take photos of the original vehicle seats without seat covers, plastic wrapping, blankets, or other items blocking the view.
• Make sure the photos are bright, clear, and not blurry.
• Try to show the full seat shape, including the headrest, backrest, seat cushion, cushion front edge, and any special parts such as leg rests or extended cushion corners.
• For rear seats, please also show the lower seat base and foot area when needed.
• Take photos from angles that clearly show the seat outline and structure, not only close-up shots.

1. Full Seat Shape and Seat Front Edge

Applies to: All vehicle seats

Photos we cannot use: Photos that do not show the headrest, the full seat structure, or the front edge of the seat cushion clearly.

Photos we need: Clear photos showing the seat outline, headrest, backrest, seat cushion, and front cushion shape. If your seat has special details such as raised cushion corners or a leg rest, please make sure they are visible.

2. Seats with Existing Seat Covers Installed

Applies to: All vehicle seats

Photos we cannot use: Photos where the original seat is covered by another seat cover. When a seat cover is installed, we cannot accurately see the factory seat shape.

Photos we need: Please remove any seat covers and take photos of the original factory seat directly.

3. Clear and Bright Photos

Applies to: All vehicle seats

Photos we cannot use: Photos that are too dark, blurry, or unclear.

Photos we need: Bright and sharp photos that clearly show the original seat shape, curves, stitching areas, cushion edges, and seat details.

4. New Vehicles with Plastic Protective Film

Applies to: New vehicles or recently delivered vehicles

Photos we cannot use: Photos where the seat is still covered by factory plastic film or protective wrapping.

Photos we need: Please remove the plastic protective film before taking photos. The seat shape must be visible without obstruction.

5. Seats with or without Leg Rest

Applies to: Vehicles that may have a leg rest, such as some Lexus or Toyota Tundra models

Photos we cannot use: Photos taken only from the front that do not clearly show whether the seat has a leg rest.

Photos we need: Please take photos that show the front edge of the seat cushion and the lower foot area. On some vehicles, the leg rest is not obvious from a straight front view, so the seat cushion front and lower area must be visible.

6. Rear Seat Base: Gas vs. Hybrid Models

Applies to: Vehicles where gas and hybrid rear seat structures may be different, such as Toyota Camry, Toyota RAV4, and similar models

Photos we cannot use: Rear seat photos that do not show the lower seat base or foot area.

Photos we need: Please take photos showing the lower part of the rear seat and the foot area. On some gas models, the rear seat base is thicker and extends toward the floor. On some hybrid models, the lower base may be thinner, with plastic trim and ventilation openings underneath.

7. Rear Seat Backrest: One-Piece or Split Design

Applies to: Rear seats where the split design is not easy to identify, such as some Honda Civic models

Photos we cannot use: Photos that do not clearly show whether the rear backrest is one-piece or split.

Photos we need: Please take photos that clearly show the rear seat backrest. If possible, include the full rear seat from side to side so we can confirm whether the backrest is a one-piece design or a split-folding design.

Photo Checklist Before Submitting

• The original seats are visible without seat covers or plastic film.
• The photos are bright and not blurry.
• The headrests, backrests, seat cushions, and cushion front edges are clearly shown.
• Special seat features such as leg rests, rear seat base shape, or split backrests are visible.
• For RAM front center seats, the photo shows more than just the center seat.
• For gas/hybrid models, the rear lower seat base and foot area are included.

If you are not sure which photos to provide, please send us several photos from different angles. Our support team will review them and let you know if more information is needed.